No need to lower mast to turn luminaries on and off. Instant power off should an electrical problem occur.
Built in level gauge
Reduces set-up time and allows the operator to ensure that the mast is setup correctly and safely.
Automatic mast safety and stowage lock
Helps prevent mast from being raised until legs are deployed and secures mast for transport.
One person deployment system
Even on uneven sports surfaces, enabling use in a much wider range of applications than other lighting towers. Compact to store and transport. Will fit through standard size door enabling multiple storage options.
Unique parallel mast design
Allows the mast sections to slide past each other and the light head assembly to be fully retracted and stowed at the base of the unit. The centre of gravity is very low with the weight perfectly balanced over the wheels for easy and safe handling even on difficult terrain.
Integrated manual winch with automatic safety brake
The slack rope safety system automatically detects when the winch rope is not correctly tensioned and prevents the user from continuing to operate the winch in the mast lowering direction. This helps to protect the user from potentially unsafe operating conditions and also protects the wire rope and winch from damage.
Independently adjustable legs
Rapid to deploy, Independently adjustable legs. Designed to enable maximum stability on any football pitch application.
Fork lift pockets and tie down points
For safe and fast handling, loading and unloading at storage depots and sports sites.
Automatic mast safety interlock system
Market leading, double pin safety locking system ensures that the mast is automatically and safely mechanically locked in all positions when raising the mast. This system also acts as a “dead man’s handle” for safe lowering of the mast.
Low pressure footprint
Low pressure footprint with non-marking base. Optimum stability with minimum ground impact. Ideal for deployment on impressionable ground surfaces.
Low centre of gravity for safe handling on site
Typical telescopic mast designs do not allow the light heads to be retracted below approx 2m height for transportation and positioning on site. This results in either having to remove the light heads or in a high centre of gravity making positioning and handling difficult and potentially unsafe, especially on uneven surfaces.
We offer a choice of two generators which are ideal for use with all our Quad Pod mobile lighting towers. Both are portable, efficient to run with low carbon emissions, and low noise levels.
Rated output: 1.6 KW
Fuel Capacity: 4.2 litre
Running time: up to 7 hours*
Rated voltage: 110V or 230V
Noise levels: 61 dBA
Dimensions (L x W x H): 499 x 285 x 466mm
How many Quad Pods will the 1.6KW generator supply? • 1 x K50 4 or 6 head unit with 200W light heads • 1 x K65 4 or 6 head unit with 200W light heads
Rated output: 3.0 KW
Fuel Capacity: 10 litre
Running time: up to 10 hours*
Rated voltage: 230V
Noise levels: 65 dBA
Dimensions (L x W x H): 578 x 440 x 510mm
How many Quad Pods will the 3.0KW generator supply? • 3 x K50 / K65 4 head unit with 200W light heads • 2 x K50 / K65 6 head unit with 200W light heads • 2 x K50 / K65 6 head unit with 240W light heads
* 1 generator powering 1 x K65 Quad Pod with 6 LED 200W Heads. Duration may depend on operating conditions.
Extension leads are available in a variety of lengths to meet customer requirements. We offer a choice of plugs and sockets, also a choice of cable specifications.